Recent content by C.D.Z.

Will try this, and hopefully find a guide out of position? all was well for 1 st 100 hours and started throwing belt all at once when deck was disengaged at to high of engine rpm. Idle way down and slowly move the disengagement lever and does not throw the belt off pulley. Thank You

Yes , deck is all original as received. Thank You

Thank You, Just deck shuts off, Kind of suspicioned the air gap may need adjustment? Will check and maybe replace pto switch.

This mower is used mainly for picking up clippings and at 98 hours on the meter, the deck belt would jump off when shutting down the deck, and could get by with going to idle and slowly moving lever to off. Assumed the belt was stretched and purchased/installed new belt, but same results, even...

Helping friend with this OLDER 300 and He states that he starts mowing and after a short time , the mower just shuts itself off? Will restart with pto switch. Any suggestions? PTO Switch? Electric PTO clutch assembly? Wiring problem? Any one experienced this problem? Thank you in advance...

I have a john deere 245 and a 320 and can not unlock the hydrostats on either one? Imove the lever to unlock and can not get the hydrostat to release for pushing or pulling the tractors. Would appreciate any suggestions to resolve this problem, Thanks in advance. C.D.Z.