Auto Doc's's latest activity

If I read the 6-page diagram correctly the machine has to be running for the alternator to power that 510 circuit to the seat switch. I...

I fail to see how the bracket can be adjusted to reduce excess cable slack if the forward bolt is in place as shown.

Hello M., The Kohler 7000 has the hydraulic lifters which means no pesky valve adjustment issues. The Kawasaki FR has solid tappets and...

I have not seen Perkins make a new engine for years and never seen one in a residential JD mower. You missed some digits on the Briggs...

Sounds logical, but the lines a fitting all the way back to the tank need to be cleared out with high pressure air. It is amazing how...

Hi Norman, I just took care of a 4440 JD farm tractor for a simple fuel elbow issue like you described. Every time the tractor was...

Hello J., When I see tap splices like that, it spells "rednecks and beer" around my area. Those things should be outlawed. Small...

That is not adjustable, it is screwed in until seated and snugged up. If you have a problem after that, the carburetor body has a...

Hi Ozcub, Yes, you said "ponder", yes, I pondered before I replied. Not an attack on you, just stating what I know from many years...

Hi Ozcub, That is an "old wives' tale" that has been around since the early wooden encased battery days. That story has been disproven...

Hello R., From this picture, I think the belt retainer tab is clocked in the wrong position for the larger idler pulley. Loosen the...

Am I correct to assume this is a manual handle operated deck? Can you give a full top view of the deck and pullies when you get an...

Wild guess: The idler with the most paint still on it was replaced, and the belt retainer guide tab was not set back on the locating...

Hello Tiger SE, Humans are being assimilated, "resistance is futile" according to the Star Trek Bork collective episodes I've watched...

Hello R., Welcome to the forum. If I am not mistaken, this is a low output stator on a Briggs and Stratton that does not have a...