Auto Doc's's latest activity

Sounds like a good fit to me. The only additional things I will mention is to use non-Ethanol fuel if it available or use a good...

These discussions about aesthetics and "curb appeal" always make me wonder about people's priorities. A pretty engine does not make it...

Hello C., Do you have a basic multi meter that can read AC and DC voltages? If not, you need to get one. Throwing parts at a problem...

Hello Scubcadet10, This is where many people blame the Nikki carburetor because they could not just simply open it up and clean it with...

that gasket that seals the plastic assembly needs replaced anytime you remove it. or else it WILL leak like this.

Hello G., That is bordering on commercial grade. How many acres do you plan to mow on a regular basis? The pricing has climbed...

Go to the link Kenbu sent you and scroll down the page, "old cajun" has it all laid out

Hello P., The only adjustment on the carburetor is the idle stop screw with the Phillis head. The generator governor and tension adjust...

Hello J., Remove the screws from the right side (has seated on the machine), lift up the control panel and look for a red or black...

Hello Up, Would you mind sharing the information about what product you used? I'm sure there are others who have or will run into this...

Hello P., This problem sounds like a bad float needle allowing too much fuel to flow past it and the seat. The needle acts like a fuel...

I don't deal with Facebook. Do you have an actual link that you can attach?

Hello S., For future reference: It is best to provide us with the product identification label information of the machine. This...

Hello D., Pardon the observation. but you did mention the "USA". We are in modern times where most young people are just breathing...

Hello D., Give them a chance to make it right before you throw them to the curb. Parts frustrations are not easy but give them a chance...