Auto Doc's's latest activity

It will need a new starter gear soon; the top edge of the gear is banged up from years of use. I recommend you get a can of brake...

You will need to check all safety switches working backwards from the white solenoid trigger wire if I am understanding the reading...

Have you tried looking your mower up in Parts Tree?

There are bolts at the bottom of the housing you will have to feel around for, then use a wrench to loosen them.

Regular blades will be fine as long as you are cutting a high RPM like it requires. When you wear those out then get mulching blades.

Blaine's Farm and Fleet is just a retail product seller and do not have any kind of service department. The warranty if needed is...

Sounds like the orbital steering assist hydraulic motor has failed a seal. You would have to search around or contact some mower salvage...

Compression at 30 PSI is way too low to support combustion. These have a compression release and usually show around 60 PSI for a...

https://mowpart.com/bracket-l-roller-75576-758-610hon/?msclkid=79b846c6448f1f63ef3c2e77abc77e3e&utm_source=bing&utm_medium=cpc&utm_campai...

Do not have a charger connected when testing but make sure the battery is good. Only test for voltage drop with the key switch held in...

Are you looking up the mower info y using the product label information? A "mulching kit" is a kit that is added to a normal deck on a...

Sounds like the exhaust is plugged with carbon. Air cannot get in if exhaust cannot get out. Some have a simple spark arrestor screen...

From your description, it needs the valves adjusted so the compression release will work. If it still fights the compression after...

Hi ACF, Here is an example of the voltage drop test...

Where is the line that leads to the carburetor come from? They may have it plumbed so one tank is the primary and the other is the...