Auto Doc's's latest activity

Are you familiar with using a meter to do voltage drop testing?

Are you cutting with the mower RPM set to high, or trying to save gas by cutting at low throttle? Mowing should be done at full throttle...

Okay?

Hello ACF, StarTech sent you diagrams, apparently the second one is a match to your machine. Print off and study the diagram. Use it...

Do you have a multi-meter or a single bulb 12V test light. Just randomly changing parts is not diagnostics, it's a lesson in futility.

Sounds more like it needs landscaping and sod put down. The grass is not hard; it is the condition of the ground.

I don't think too many folks are going to rush right out and order Amsoil for their modern throw away 2-stroke just so they can conduct...

Thanks for letting us know you have it going again.

Are you getting voltage to the small trigger wire when the key is turned to the crank position? If so, it is not it is not a safety...

I would not advise anything with fuel injection on lawn equipment. The technology is too new and unreliable. But it's your money.

You need to use an adjustable gap spark test and get rid of the inline "Christmas" flashing light type spark tester. You can get a coil...

I'm curious as to why you want softer tires.

This problem sounds like the wrong blades are repeatedly being used. The three blade decks have the middle spindle placed forward of the...

The clutch pedal also acts as a brake when it's pushed all the way down normally. If it is not braking, the brake cable is broken or out...

Sometimes it is simple but seems difficult. The KISS (Keep It Simple Silly) principle typically applies.