Auto Doc's's latest activity

Does your model have the 2-piece shaft assembly that you can change out attachment on? Here a Parts Tree link...

Hi Chris623, At 80 years of age I don't think I would attempt this repair. I'm 61 and I don't rush around like I used to. An...

1000 hrs. is an estimated (exaggerated in my opinion) life expectancy of the oil, but not a pass to neglect checking it for water or...

Glad you found it. With VIN and PIN numbers it is always a zero "0". Here is a parts diagram...

Sounds like the power head needs to be removed, then upper drive cable needs to be taken out of the tube and a thick coat of grease...

Most likely it has broken compression rings or a badly worn cylinder allowing too much pressure back into the crankcase. A failed...

Can you take pictures and attach them so we can have an idea what you are talking about?

You are correct, that is a part listing label you saw, I had to look at mine just a minute ago. The product ID label is actually on the...

The best part of that advice is to use Ethanol free fuel every time. It does not breakdown rapidly like Ethanol blend fuel.

I gave up on the gaming back in the early days of the Pac Man floor consoles and Wizards of Wor on a Tandy machine. Yep, I'm dating...

Pictures would help. Maybe some parts views will help...

Hello ACF, All JD mower equipment comes with a durable product identification number (PIN). Some are fairly well hidden on the frame...

Hello rh hutchins, Sounds like pivot parts stiffened up from sitting and they need to be exercised & lubed carefully (WD-40) to get...

Look under the seat and give us your model and serial number, so we can help you with references if needed. Cab Cadet also provides...

From you description I would suspect there is low compression. Maybe the valves need to be checked for proper seating. Carbon does build...