Auto Doc's's latest activity

Please provide a couple of pictures of your starter, there are several different design possibilities

Is it on the actual carburetor itself or the governor arm? Some carburetors have them and some don't.

It's possible, or all of the connections need to be cleaned really well with a small wire brush, so the surface contacts are 100%...

Maybe this will help...

Sounds like the starter gear is upside down or the wrong tooth count on the gear.

Sounds like you are using better oil than what the OEM recommended back when new. Most all OE engines have been prescribed to use SAE 30...

Here is a similar build to your engine...

Hello Douglas Lee, Tires are made from petroleum product, so grease will not harm the rubber. As with any product, use it sparingly...

Can you provide the manufacturer label information of this yard machine along with the engine information stamped into the top of the...

Brand loyalty has been perverted and exploited by marketing for the past 25 years. The older well-established companies have shifted...

Look for the engine model and serial number stamped into the valve cover or etched into the side of the engine block on the opposite...

Hi gbrewer, That is made to keep excess dust from building up around the top of the shaft. Not all were equipped with them. Mostly OE...

Make a point to keep the valve adjusted every season and keep your oil changed.

Hello, I apologize for not getting back to you sooner. The PTO and deck belts do not affect the wheel drive motors on these. Did you...

If the fuel lines are old and rigid, I recommend you replace them with a quality brand Old line will collapse internally. Also check...