Auto Doc's's latest activity

Hello mRyanAB, Sounds like you are having a fuel starvation issue according to your description. Take the fuel line off at the tank...

Pull the bowl and remove the float, make sure the float does not have fuel in it, simply shaking the float, you should feel fuel inside...

Sounds like it maybe an outsourced "Harbor Freight" style clone engine (Generac just put their name on it). A lot of companies are doing...

The one I have actually split the fuel line from age at the tank fitting, so the ai a good idea to replace the lines.

https://www.amazon.com/Generac-LER1135GMNG-Edger-Orange/dp/B0B197R8H8

Hi Scrubcadet10, I have notice that Generac and DR trimmer along with others have been adding a bunch of consumer product lines...

Hi Doug041, Welcome. Some important things to remember: Is provide us the product label information so we can assist you better. If...

Your description sounds like a badly worn Deck PTO switch. https://www.partstree.com/parts/snapper-1738982yp/

Hello, Tiger, Small Engine, I cannot recall ever replacing a rider engine flywheel key unless a DIY type forgot to tighten the center...

Hello RWM54, We really need the product label information off the machine. A wiring diagram is needed, otherwise we are out here...

It may take running multiple times to get over being over filled with oil. The breather also likely got excess in it so it may take time...

Pull the rocker valve cover and see if it bent a pushrod. Let us know what you find.

Hi hlw49, I've seen a couple of these old Snapper RER's online that people have adapted a 46-inch deck to from a different mower onto...

Hello HR, Yes, it is known as the "cylinder head gasket". Yes, you are sanding the head to true up the cylinder head gasket mounting...

If this model has a fuel vapor check valve (usually hidden) in the top of the fuel tank, that is a likely suspect. Like Scrubcadet10...