Auto Doc's's latest activity

Hello, Tiger Small Engine, I used to only buy new engines from small engine warehouse online, but they have gotten out of hand with...

Hi BrentW, I think that would be a wise move. When you open the new spindle assemblies up, you might be surprised. Pre-assembled...

Did you give them the engine model and type number off the engine? If not, they just looked it up by the machine model number. These...

Is the governor link hooked to the throttle? An engine cannot run wide open with a closed throttle. Are you sure the governor adjustment...

I think some of the difference comes down to how the 2 machines are wired. This Murray (white wire) has to pass through the two safety...

Have you actually looked at the carburetor throttle plate? I have seen them come off and get trapped in the intake port before. That is...

Thanks to all the folks that have stuck with this issue and finally hammered it out (I hope). So far, knock on wood, everything has...

Ebay turns up with good used rider engines pretty often. Most people trash their mower decks long before the engine breaks down...

Most likely the battery or a corroded cable connection from sitting. A multimeter will only measure the voltage potential, not the...

Not sure why you would call this a "plastic engine". Is that because of all the dress up plastics around the engine? Sorry, this looks...

PTO clutch switch? I don't have a wiring harness diagram for reference. We need the manufactures label information to get a correct...

Hi, Tiger, Small Engine, What is worse is when you walk in with the machine information and the actual part in hand and they say: "my...

Hello Mjhover, That model with a Kawasaki engine is bordering on commercial grade. If you have a lot to cut it would be great. How many...

Hello grantiman, Can you also provide the engine product label numbers? The engine is not made by Cub Cadet. Look at the fuel lines...

Hello MedicineMan7, Look for a main fuse box and check all fuses, then inspect all harness wires for any rub through damage. Will it...