Auto Doc's's latest activity

Hello vivox, Welcome to the group. I hope we can be of some assistance as needed but do all of us a favor for which ever machine you...

Hello BGS Mex, That fuse looks like an original and very weathered from age and exposure. It's been heated up a lot. I hesitate to...

Hi JohnnyEmac, I recommend you give the entire unit a thorough visual inspection for anything else that might be out of place loose or...

It used to be any shop that was Briggs and Stratton certified could perform warranty repairs, now very few shops keep up with continued...

Put a for sale sign on this one and look for a lightly used Kawasaki Mule. These new B&S "Big Block" EFI engines are plagued with...

Modern CS individuals are mostly under trained, inexperienced and overwhelmed by what they are hired to do. It's also happening at the...

This all points to fuel delivery so far. It would not run at all if it had a cam problem

Here is a video that may help...

Hi RYANS' Not a guru, but I've had a lot of surprises with creative design changes through the years.

I think the later model Generac generators had a similar filter system after the change their designs a little and got away from the...

Check this out: https://www.partstree.com/parts/briggs-stratton-692292/

Sounds like the battery needs to be load tested to make sure it has enough amperage. A multimeter only reads voltage. Voltage is only...

This may help...

Are all of the engine mounting bolts in place and the mount area holes solid? The engine looks moved out of place in the pictures.

Can you provide a model and serial number off of the manufacturers label? Scag makes a lot of different model walk behind mowers...