Auto Doc's's latest activity

Is this what you have? Usually only the large outer one needs to be replaced...

Hello, We need the model number and serial information off of the manufacturers label. Otherwise, we are just guessing what you...

Hello, Good that you let us know the basic engine model, but we need to know what machine this is on. Look for the manufacturers label...

Hello Ibrahim, Not out of the woods yet. As has day wears on, the site is hanging up trying to open posts or send replies. 10:15 TX...

You have a Chinese built B&S engine. They are becoming more common these days. The problem is likely in the fuel connection at the...

Hello Muhammed, StarTech is a huge loss along with a couple of others who have more quietly just disappeared. Small engines is a tough...

Maybe this will help...

Your efforts are appreciated; some very good members have dropped out due to the hangups. We are all just trying to help people the...

Is the governor arm pull back spring in place?

Hi Freddie21, I'm curious why you say that. Have you used them for commercial purposes in the past, or regular seasonal residential...

Check the throttle plate and make sure a screw has not come loose. I've seen it happen a couple of times. The throttle blade gets wedged...

It's toasted, the magnet coil is melted down. It was likely noisy for quite a while has the bearing failed.

I am finding myself overloaded with "good deals" for a break on their repair costs. I need to get on Facebook Marketplace, something and...

To get them started in a tight area, use a short section of fuel hose or vacuum line pushed tightly onto the tip of the plug, then ease...

I am monitoring it and have been noticing the slowdowns. I haven't been able to find what's causing them yet, but I've put more active...