Auto Doc's's latest activity

I think the later model Generac generators had a similar filter system after the change their designs a little and got away from the...

Check this out: https://www.partstree.com/parts/briggs-stratton-692292/

Sounds like the battery needs to be load tested to make sure it has enough amperage. A multimeter only reads voltage. Voltage is only...

This may help...

Are all of the engine mounting bolts in place and the mount area holes solid? The engine looks moved out of place in the pictures.

Can you provide a model and serial number off of the manufacturers label? Scag makes a lot of different model walk behind mowers...

Is this what you have? Usually only the large outer one needs to be replaced...

Hello, We need the model number and serial information off of the manufacturers label. Otherwise, we are just guessing what you...

Hello, Good that you let us know the basic engine model, but we need to know what machine this is on. Look for the manufacturers label...

Hello Ibrahim, Not out of the woods yet. As has day wears on, the site is hanging up trying to open posts or send replies. 10:15 TX...

You have a Chinese built B&S engine. They are becoming more common these days. The problem is likely in the fuel connection at the...

Hello Muhammed, StarTech is a huge loss along with a couple of others who have more quietly just disappeared. Small engines is a tough...

Maybe this will help...

Your efforts are appreciated; some very good members have dropped out due to the hangups. We are all just trying to help people the...

Is the governor arm pull back spring in place?