Auto Doc's's latest activity

It happens even at 2AM when I'm working all night or cannot sleep. The afternoons are the worst. I have the impression that the server...

Can you connect a wire from the B terminal on the switch (with the battery connected) then touch it to the white wire pin on the...

That pretty much leaves a failed compression release mechanism on the camshaft. I'm not sure if Briggs & Stratton had caught on their...

Hi BGS Mex, I finally had a chance to print off the diagram and study it. Print off the diagram that scrubcadet10 sent you. The way...

Is the diagram scrubcadet10 sent you correct for your machine?

Just be careful that you are running 12V power to the correct circuit, same with ground. An inline fuse on your test wires would be...

Here is a generic diagram that may help: https://www.motoruf.com/bild2cache/zenbit_katbilder_murray824_gif-1800-1265.jpg

From the sound of it, the tank may have a blockage starting at the fuel nipple or the fuel filter is choking up. Gradual loss of power...

Try these folks, they may be able to help you: https://tb.shankslawn.com/oemparts/c/troy_bilt__legacy_sickle_bar_mowers/parts

Try these folks, they may be able to help you: https://tb.shankslawn.com/oemparts/c/troy_bilt__legacy_sickle_bar_mowers/parts

Did you check the ring end gaps prior to assembly? I made that mistake many years ago when I spent hours sleeve honing one of these...

Hi BrentW, Does the center spindle shaft have a spacer pipe to make sure the tapered roller bearings are not bottomed out in the races...

Hi BrentW, Does the center spindle shaft have a spacer pipe to make sure the tapered roller bearings are not bottomed out in the races...

Hello ACF, That is not grinding, it is fluid bypassing internally inside the motor due to wear or a choked oil filter. This unit has a...

Hi BGS mex, For true load testing, rig an old round incandescent head lamp and use it for load testing the wires. Ohm testing can...