Auto Doc's's latest activity

Try these folks, they may be able to help you: https://tb.shankslawn.com/oemparts/c/troy_bilt__legacy_sickle_bar_mowers/parts

Did you check the ring end gaps prior to assembly? I made that mistake many years ago when I spent hours sleeve honing one of these...

Hi BrentW, Does the center spindle shaft have a spacer pipe to make sure the tapered roller bearings are not bottomed out in the races...

Hi BrentW, Does the center spindle shaft have a spacer pipe to make sure the tapered roller bearings are not bottomed out in the races...

Hello ACF, That is not grinding, it is fluid bypassing internally inside the motor due to wear or a choked oil filter. This unit has a...

Hi BGS mex, For true load testing, rig an old round incandescent head lamp and use it for load testing the wires. Ohm testing can...

The adjuster screws have what is known as interference fit threads. It takes 2 wrenched as shown in the video I sent you. One holds the...

Hi tom tuttle, I've been in the vehicle and equipment repair industry most of my career and it has gone downhill and gaining speed...

In the shops (slight) defense, they are likely having trouble finding anyone willing to work (for next to minimum wage) on this kind of...

It sounds like you possibly have a blob of foreign contamination floating around in the tank and it is blocking the fuel pick up line at...

See if there is an independent small engine shop in the area that can help you, but you are still going to have to figure out a way to...

Hello spankyscamp, Are your center adjuster bolts on the lifter turning to easy like the threads might be worn? Here is a video that...

I also recommend thread locker but expect it to be very difficult if you have to take it off in the future. Red works well for most...

I call it Engineers having fun creating more pains for the end user. Glad you got it sorted out.

Delphi Packard 56 connectors have been used on lawn equipment harnesses for many years, and a lot of people have no idea where to find...