Auto Doc's's latest activity

This link is from an overseas Ebay site and will not show here in the U.S. from what I have tried. It likely has a security firewall...

Locate the product information tag on your machine and then go to this link and match up what you have for reference otherwise we are...

Hello Melanelly, Welcome, Your heading is under "Hustler", but you have a Toro. It helps us to help you if you include the machine...

Is this the starter design with 2 studs that mount with nuts into a bracket or the one with 2 cross bolt holes that bolt into the side...

Hello ILENGINE, You are correct. It's on the right side of the transaxle assembly for this model. My old Huskee garden tractor is a...

Hello Folks, I have checked online and find a diagram that is close, but questionable. There are multiple problems due to bypassed and...

Wrong starter.... Amazon strikes again?

Hello healthyveggy, It helps to have the model number information off the machine label, so we can help you and not make wild guesses...

That switch #24 is down at the base of the shifter. It is similar to my old 50" cut Huskee Garden tractor.

Hi BrentW, My guess is that you are pumping grease into a spindle housing with sealed bearings. It is a cruel engineering joke for many...

Good writeup Scrubcadet10, It's just a mower, aren't they all the same? Now let's see how many new folks or even the existing ones...

White pancake design for engines without a fuel pulse pump. Red pancake design is for gravity feed fuel systems without a fuel pulse...

These K241s are not as critical about loose valve clearances as the newer OHV rocker style engines. Being that it has had repeat...

Replace the switch and don't try to "bypass" anything to make it work.

This is a previous defect return, and a store sold it to you. I've seen this before. It was not properly checked out before reselling.