Media

Mower Deck Before 2 Again on both sides the paint is lacking and rust is rampant. Parts are broken and missing so some repairs and replacement parts

Mower Deck Before 2 Again on both sides the paint is lacking and rust is rampant. Parts are broken and missing so some repairs and replacement parts

  • 0
  • 0
Mower Deck Before 1 There is literally little paint left on the deck and it seems that the primer used failed to allow rust to invade under the yellow

Mower Deck Before 1 There is literally little paint left on the deck and it seems that the primer used failed to allow rust to invade under the yellow

  • 0
  • 0
Accessories 10 Console finished up and assembled. Note the controls are red instead of the original orange. I just could not find any orange plastic

Accessories 10 Console finished up and assembled. Note the controls are red instead of the original orange. I just could not find any orange plastic

  • 0
  • 0
Accessories 9 column frame support cleaned and painted as well.

Accessories 9 column frame support cleaned and painted as well.

  • 0
  • 0
Accessories 8 These are the components of the console assembly and the seat hardware to connect the seat. All have been painted gloss black like the

Accessories 8 These are the components of the console assembly and the seat hardware to connect the seat. All have been painted gloss black like the

  • 0
  • 0
Accessories 7 Other plastic parts for the console and the spindle cover on the mower deck. These were painted with plastic paint in gloss black like

Accessories 7 Other plastic parts for the console and the spindle cover on the mower deck. These were painted with plastic paint in gloss black like

  • 0
  • 0
Accessories 6 major accessories were plastic and sun-worn. Paint coating with plastic paint does the trick.

Accessories 6 major accessories were plastic and sun-worn. Paint coating with plastic paint does the trick.

  • 0
  • 0
Accessories 5 Foot pads painted back to original black luster.

Accessories 5 Foot pads painted back to original black luster.

  • 0
  • 0
Accessories 4 The minor accessories are all metal parts, so had to be stripped, primed and repainted.

Accessories 4 The minor accessories are all metal parts, so had to be stripped, primed and repainted.

  • 0
  • 0
Accessories 3 The main tower was stripped down, primed, and repainted black to bring back its original luster. This is a metal frame so rust had to b

Accessories 3 The main tower was stripped down, primed, and repainted black to bring back its original luster. This is a metal frame so rust had to b

  • 0
  • 0
Accessories 2 The main console box was painted with black plastic paint as its solution.

Accessories 2 The main console box was painted with black plastic paint as its solution.

  • 0
  • 0
Accessories 1 Main accessories are all sun-worn and need to be refurbished to resolve sun damage.

Accessories 1 Main accessories are all sun-worn and need to be refurbished to resolve sun damage.

  • 0
  • 0
09 Test tank by filling with water overnight over the hole level looking for leaks I filled the tank with water over the patch level. If you can,

09 Test tank by filling with water overnight over the hole level looking for leaks I filled the tank with water over the patch level. If you can,

  • 0
  • 0
08 Apply the patch on the soft body material so it welds together When you sense the material is bonded together, smooth it down with your tools li

08 Apply the patch on the soft body material so it welds together When you sense the material is bonded together, smooth it down with your tools li

  • 0
  • 0
07 Apply high heat to SOFTEN the body Heat the tank plastic first because it is bigger. then apply to the patch piece. when they are both feeling

07 Apply high heat to SOFTEN the body Heat the tank plastic first because it is bigger. then apply to the patch piece. when they are both feeling

  • 0
  • 0
06 Line the patch up so it overlaps as much as possible It is a good idea to make the patch material oversize by about 1/2 inch or so.. It needs to

06 Line the patch up so it overlaps as much as possible It is a good idea to make the patch material oversize by about 1/2 inch or so.. It needs to

  • 0
  • 0
05 Bottle Shape Comparison and clean tank with the alcohol very well You have to get anything that might get between the plastics out of the way by

05 Bottle Shape Comparison and clean tank with the alcohol very well You have to get anything that might get between the plastics out of the way by

  • 0
  • 0
04 Cut the Bottle close to shape needed Preparation and making the piece fit the hole is the key to a successful operation.

04 Cut the Bottle close to shape needed Preparation and making the piece fit the hole is the key to a successful operation.

  • 0
  • 0
03 Doner Plastic Bottle Plastic bottles like this for alcohol are the same material and chemical tolerence. A Milk jug will work as well too, but

03 Doner Plastic Bottle Plastic bottles like this for alcohol are the same material and chemical tolerence. A Milk jug will work as well too, but

  • 0
  • 0
02 Gas Tank Hole to be Fixed This was my hole to resolve on my John Deere 115.

02 Gas Tank Hole to be Fixed This was my hole to resolve on my John Deere 115.

  • 0
  • 0

Footer Links 1

Top