Latest activity

You are correct, I attached the wrong manual. Service manual for that engine is Tecumseh part #740047 which I can’t find a PDF format.

Yes the photo that was attached of the adapter is exactly what I have. I guess the flywheels on these engine must have the flywheel...

check the oil level, and for gas in the oil

And that is the downside of electrical issues. You can spend hours and hours tracking down and repairing what in some cases us a minor...

wiring replacement after a fire or overcurrent melt is about the worst job out there. I excel at finding and fixing electrical and...

wiring replacement after a fire or overcurrent melt is about the worst job out there. I excel at finding and fixing electrical and...

I usually use a loop of wire around any spring that I can't pull with vise grips or some kind of spring puller like auto drum brakes take.

Seems to be correct for that 2 cycle. (and 60 psi seems to be about right) Here is some info...

Unless the spark plug was from a known good source, I'd try another. Then I would blow the cylinder out with compressed air to dry it...

I looked at the parts breakdown again and I’m wrong. Your engine does use a flywheel adapter, not flywheel key. Trying to explain its...

I’m thinking you need an offset key. Probably one of these...

I am working on a Snapper snowblower with a Tecumseh HSK600-1683(T). I have spark and 60 psi of compression. From what I have...

Page 135, figure 233 is where magic happens. Getting the spring out enough to get a wire loop is the difficult part with only two hands...

Probably the best lades are made with marbain steel https://www.fisherbarton.com/products/turf/marbain/

Do you know what that hole looks like inside of the crankcase? Is that brushing in a blind hole or is it through to the inside of the...