Latest activity

  • K
    Kurt M reacted to Auto Doc's's post in the thread Craftsman LTX 1000 starting issues with Like Like.
    Clean and tighten all connections starting at the battery. Corrosion starts as a thin film and does not always look nasty and crusty...
  • J
    jfred1026 reacted to ILENGINE's post in the thread Craftsman DYT 4000 with Like Like.
    The bottom bearing in your electric clutch has seized and is now turning the deck drive pulley on the clutch instead of freewheeling...
  • M
    MParr reacted to Will9000's post in the thread CV730 has me stumped with Like Like.
    That's what I'm leaning towards. Worn cam or something else that's not worth it to fix
  • E
    enigma-2 replied to the thread Discharge problem..
    Sounds like you (+dealer) has looked at everything (except the one possibility that can cause this.) I'd recommend checking the tension...
  • R
    RevB replied to the thread New Blade clutch questions.
    I asked because I knew, not because I didn't.
  • A
    Clean and tighten all connections starting at the battery. Corrosion starts as a thin film and does not always look nasty and crusty...
  • G
    GearHead36 replied to the thread Rear tires with more traction.
    I have a residential ZTR, and a commercial ZTR with a steering wheel, which I got for it's supposedly better performance on hills &...
  • A
    Hello M., Welcome newbie. It helps us to know the model number stamped in the top cover or etched on the side of engine block...
  • ILENGINE
    Overfilled or mower being tipped in a direction that is allowing oil to enter the breather where it can flow into the air cleaner. Or...
  • ILENGINE
    ILENGINE replied to the thread Craftsman DYT 4000.
    I was editing my post when you responded so may want to go back and look at what I added.
  • J
    jfred1026 replied to the thread Craftsman DYT 4000.
    I was leaning that way, but I needed to verify. Thank you for the response.
  • ILENGINE
    ILENGINE replied to the thread Craftsman DYT 4000.
    The bottom bearing in your electric clutch has seized and is now turning the deck drive pulley on the clutch instead of freewheeling...
  • J
    jfred1026 posted the thread Craftsman DYT 4000 in Craftsman.
    I have an older DYT 4000 Model # 917272247 and the mower deck will not stop spinning. I replaced the switch up top and did not help. I...
  • A
    Auto Doc's replied to the thread New Blade clutch questions.
    Hello RevB. A Belleville washer is "cupped" in the middle and made of spring steel. It acts similar to a split lock washer but hold...
  • A
    Auto Doc's replied to the thread Electric start.
    Hello R., Apparently, you get better ethanol blend fuel than I do down here in South Texas. The constant high temps down here breaks...
Back
Top