Latest activity

Belts aren't complicated if you can measure carefully. Among the more common belts are 3L Section - 3/8" Width X 7/32" Depth A/4L...

Kinda don't think you need 120psi since the gauges only go to 100 psi. 50 psi will do as you are measuring the relative sealing ability...

white

https://a.co/d/0iWXpKym That's the one I bought for it. It's the same one that was on it when I got it. The original carb was long...

What brand carb does it have? Do you have the spec #?

And then after you get the spark issue fixed, then you need to concentrate on setting the timing.

The problem is your standard dimensions do not apply to John Deere or MTD/Troybilt/Cub Cadet belts because of unique width., depth, and...

He hasn't answered that question. He hasn't answered multiple questions. I suspect a 🧌 until he answers all of the questions and...

Belts aren't complicated if you can measure carefully. Among the more common belts are 3L Section - 3/8" Width X 7/32" Depth A/4L...

Please post engine spec number so we know which electrical setup you have. This manual may be of some help. Section 8. Im assuming...

After 35 years my K301 lost it's spark. I replaced the points, condenser and coil with new parts twice, each time with different new...

The link you have hooked to the control (the sprocket as you called it) needs to be removed and hooked to the governor arm out of the...

Here is a better video of the linkage. This one is very clear and appears similar

That video seems right on. Some Briggs mower engine tanks are vented and the caps do not need a vent. Some are not. The tank I have...

I use a pull behind catcher , works well when the grass is dry