Latest activity

  • McTurff
    McTurff replied to the thread Jacobsen 1200 super chief.
    When I turn key yes there is power to starter! But solenoid does not click I just took a ground wire from neg battery and grounded on...
  • S
    slomo replied to the thread Jacobsen 1200 super chief.
    When the solenoid gets 12 volts DC from the key, does the solenoid output have continuity with the input? Or input to output same thing...
  • S
    slomo replied to the thread 802 volt Scag Turf Tiger Zero Turn.
    Talk about turf compaction time. Going to be a heavy mower when you get done.Probably look like a tank has mowed your yard LOL.
  • M
    Mark H_NO reacted to slomo's post in the thread Troy-Bilt Bronco will not start with Like Like.
    Dead cell or three in the battery. LOAD test it at an auto parts store. Or find someone with a real carbon pile tester for a proper...
  • C
    I have a 61” Scag mower that is being converted to all electric. It is getting a massive 31.2 kWh battery that will be 802 volts when...
  • McTurff
    McTurff replied to the thread Jacobsen 1200 super chief.
    I put jumper cables to starter it works! Put new solenoid on nothing! Power from key switch goes everywhere! I have changed nothing...
  • S
    slomo replied to the thread Jacobsen 1200 super chief.
    Pull the starter off and bench test it with a jump box. This is not a rule but SHOULD BE. If you replace a starter replace the...
  • S
    slomo replied to the thread Troy-Bilt Bronco will not start.
    Dead cell or three in the battery. LOAD test it at an auto parts store. Or find someone with a real carbon pile tester for a proper...
  • B
    BearK replied to the thread Fuel level level marker.
    Thanks, I appreciate your response. I was hoping that someone had addressed the issue. I didn't know if the were float balls that might...
  • B
    BearK replied to the thread Fuel level level marker.
    Thanks, I appreciate your response. I was hoping that someone had addressed the issue. I didn't know if the were float balls that might...
  • B
    BearK replied to the thread Fuel level level marker.
    Thanks, I appreciate your response. I was hoping that someone had addressed the issue. I didn't know if the were float balls that might...
  • B
    BearK replied to the thread Fuel level level marker.
    Thanks, I appreciate your response. I was hoping that someone had addressed the issue. I didn't know if the were float balls that might...
  • B
    BearK replied to the thread Fuel level level marker.
    Thanks, I appreciate your response. I was hoping that someone had addressed the issue
  • ILENGINE
    For us to look up specifics about your mower we will need the actual model and serial number from the tag under the seat.
  • M
    Find a repair shop that uses Kohler diagnostic software. Evidently, the shop that you used doesn't have it. The joys of owning a fuel...
Back
Top