Latest activity

I still don’t know how that ground lug got on there. I never had it in a shop for that kind of work. It had to have been there for the...

Welp…changed the stator…cleaned everything in that flywheel housing…put it all back together and it finally runs. Ran it on high for 30...

It's been my experience with similar decks that the idler pulleys that the BACK of the belt is running on to check closely for any up...

Give model and serial number. One tip is seat switch. Is the problem that the PTO clutch does not engage when you switch it on?

It will work.

I have a 463707-0168-E1 that I am trying put back together. It was given to me by my Step Father. I have the parts list manual, from...

2018 ex-mark "stirrus" 24 hp kohler engine. no pto. new switch. has power at switch but no engage. electric clutch is ok. i need a...

Sometimes a model of mower can be found by using the engine model information, but I can't read the numbers on the tag on the engine in...

Your right, sorry! I missed a digit Ok so the belt from motor is 131cm. 51.5”.

They are short. Here is a photo of the underneath

This tank is hidden in the rear of the chassis and there are no provisions to add a fuel sender and gauge without some serious...

After reading what Rivets wrote, I was WRONG. Rivets is correct. Good catch sir. My bad. I admit it to the group. Vacujet all the way.

After reading what Rivets wrote, I was WRONG. Rivets is correct. Good catch sir. My bad. I admit it to the group. Vacujet all the way.

No prime, no start. If fuel is not shooting into carburetor throat when primed, then the gasket is not sealing and/or the air filter...

Tells me that entire engine will have to be gone through. Tells us the primer isn't working. Air filter plate most like was over...