Latest activity

Sounds like the jet in the bowl nut is clogged.

Depending on the pump and bleed orifice can vary from about 1700 to 2900 psi.

Have you checked the pulse line? It's the small line that is on the bottom of the fuel pump and plugs into the Valve cover. If the pulse...

3 hoses on a pulsed fuel pump. 1.Fuel inlet to pump - from tank 2.Fuel outlet from pump - to carb 3.Pulsed air hose from engine block...

Ok I’m thinking it’s something with the pulse. I’m able to hook the same fuel pump up same orientation to a different mower and it is...

Have you checked the pulse line? It's the small line that is on the bottom of the fuel pump and plugs into the Valve cover. If the pulse...

V-BELTS now days. I most generally always measure a new belts length BEFORE I install and compare it to the intended specs NEW for...

Are all zero turn mowers with hydros pretty much run the same hydro pressures? What are the typical hydro pressures? Thanks in advance...

One crack in the pulse line for example will cause the fuel pump not to work. Replaced ALL the fuel lines from tank to carb inlet...

Can't actually see fuel shooting into the air horn when the bulb is pressed, but if the engine started on ether, wouldn't it continue to...

You can buy a box of 10 belts from the same manufacturer, same size and model number. NONE will be the same size. It's really bad doing...

What about up to 2 inches short? That's what caused me to quit Sunbelt Outdoors as a dealer.

Looks like some kids have been mud bogging with it. Man she is dirty. All that dirt holding water rusting and shorting parts out. I see...

There is no choke. The primer bulb seems to be working. The bowl nut is also clean, holes open.

Try this old timers trick. Remove fuel inlet line from the pump. Put it into a glass jar and blow into the tank as hard as you can...