Latest activity

  • F
    Forest#2 replied to the thread Troybilt Pony 13AN689G766.
    V-BELTS now days. I most generally always measure a new belts length BEFORE I install and compare it to the intended specs NEW for...
  • C
    Cut up posted the thread Hydro Pressures in Scag.
    Are all zero turn mowers with hydros pretty much run the same hydro pressures? What are the typical hydro pressures? Thanks in advance...
  • M
    MParr reacted to slomo's post in the thread No fuel pump output with Like Like.
    One crack in the pulse line for example will cause the fuel pump not to work. Replaced ALL the fuel lines from tank to carb inlet...
  • 1
    1947Ford8n replied to the thread Won't start on gasoline.
    Can't actually see fuel shooting into the air horn when the bulb is pressed, but if the engine started on ether, wouldn't it continue to...
  • F
    Forest#2 reacted to slomo's post in the thread Troybilt Pony 13AN689G766 with Like Like.
    You can buy a box of 10 belts from the same manufacturer, same size and model number. NONE will be the same size. It's really bad doing...
  • F
    Forest#2 reacted to StarTech's post in the thread Troybilt Pony 13AN689G766 with Like Like.
    What about up to 2 inches short? That's what caused me to quit Sunbelt Outdoors as a dealer.
  • F
    Forest#2 reacted to slomo's post in the thread Charging Problem with Like Like.
    Looks like some kids have been mud bogging with it. Man she is dirty. All that dirt holding water rusting and shorting parts out. I see...
  • 1
    1947Ford8n replied to the thread Won't start on gasoline.
    There is no choke. The primer bulb seems to be working. The bowl nut is also clean, holes open.
  • R
    Rivets replied to the thread No fuel pump output.
    Try this old timers trick. Remove fuel inlet line from the pump. Put it into a glass jar and blow into the tank as hard as you can...
  • R
    Rivets replied to the thread Steering damper replacement.
    Just my opinion, I always use OEM parts bought from a dealer. That way if there is a problem I have some recourse to help in rectifying...
  • S
    It is time, actually past time, to replace the steering dampers on my 2004 Hustler Mini Z. My question is OEM parts versus aftermarket...
  • Masonisking
    Masonisking replied to the thread No fuel pump output.
    Iv got the line to the carb taken off to see if I’m getting anything and I’m not. I put on an after market carb so I’m not sure if I...
  • M
    Mark H_NO replied to the thread No fuel pump output.
    Ok, just checking. Check the pulse line, maybe there's a crack. If you take the fuel line off the carb, and crank the engine, what...
  • Masonisking
    Masonisking replied to the thread No fuel pump output.
    Towards the tank.
  • Masonisking
    Masonisking reacted to Mark H_NO's post in the thread No fuel pump output with Like Like.
    Slomo is talking about the pickup in the tank. When you say before the filter, are you blowing towards carb or tank?
Back
Top