Latest activity

  • S
    Have done many of these kits in the Big Dog which is a red Hustler. Never had any issues.
  • sgkent
    sgkent replied to the thread Engine run at full rpm only.
    read up on it first, and look at some youtubes. It is really easy but also easy to get confused
  • sgkent
    sgkent reacted to LT1045wrh's post in the thread Mowing then dies with Like Like.
    Okay here’s the latest, and I could kick myself. Was thinking about the carb and maybe some of the members are correct in assessing the...
  • M
    Mark H_NO reacted to LT1045wrh's post in the thread Mowing then dies with Like Like.
    Okay here’s the latest, and I could kick myself. Was thinking about the carb and maybe some of the members are correct in assessing the...
  • M
    Yeah, the offset is critical too. I suppose that you are stuck with OEM rims.
  • LT1045wrh
    LT1045wrh replied to the thread Mowing then dies.
    Okay here’s the latest, and I could kick myself. Was thinking about the carb and maybe some of the members are correct in assessing the...
  • M
    MParr reacted to JayTee's post in the thread Wheel for 23 X 10.5-12 Walker MBS 27 with Like Like.
    My Walker is a 2014 MBS 27 HP; Serial No. 111774. The stock number for the wheel is 2071-1; 12" rim, 4-hole- 4.25" bolt pattern. Tire...
  • H
    After replacing the push rod, I inspected the governor gear and arm and found no signs of wear or damage. Should I adjust the arm...
  • J
    jlwoods99 replied to the thread Nikki carb questions.
    That definitely was part of the problem, when I got this mower it had set along time with old fuel. All the fuel lines were plugged. A...
  • J
    jlwoods99 reacted to Auto Doc's's post in the thread Nikki carb questions with Like Like.
    When I was a service manager at a local JD dealer, the small engine and rider customers consumed much of my time with "stupid". JD and...
  • JayTee
    My Walker is a 2014 MBS 27 HP; Serial No. 111774. The stock number for the wheel is 2071-1; 12" rim, 4-hole- 4.25" bolt pattern. Tire...
  • F
    Forest#2 replied to the thread Compression Tester.
    AND a mityvac pressure/vacuum tester is a good thing if you plan on working on chainsaws. Do not confuse this mityvac leak test with a...
  • F
    Forest#2 replied to the thread Compression Tester.
    If you are asking about removing the welch plug to clean the carb and install a rebuild kit the answer is usually No to removing the...
  • A
    Auto Doc's replied to the thread Cub 5252 fuel trouble....
    I recommend you look up your engine label information on the Parts Tree website. A have had too many issues with Amazon parts. eBay is...
  • R
    Rivets replied to the thread Cub 5252 fuel trouble....
    Personal opinion, I never trust AutoScam parts. Always buy OEM parts.
Back
Top