Latest activity

Tell me about it. Well removed tank and cleaned it out. Replaced first in line filter. Second filter I replaced a few months ago and...

The Gator G6 are 3" wide and 1/4" thick. So, they are heavier than the OEM blades. Your engine may not have enough horsepower to handle...

Have a ZTHD 52” took the stock blades off at 25 hrs, put on some Oregon 396-806 g6 gator, cut well but don’t seem to discharge the...

Gator blades are not meant to bag or be any type of high or far discharging of the clippings. They are meant to mulch only. Mulching...

I think I forgot the spring from the governor arm to the control plate to pull the throttle cable. Now that I put it on, the governor...

Hello C., I don't think they make a metal carb for this design.

Andrews Large is correct. Get a new metal carb.

Order a replacement carburetor now please. You’ll thank me. That is a plastic carburetor that can be cleaned. However, for your time and...

Gator blades are not meant to bag or be any type of high or far discharging of the clippings. They are meant to mulch only. Mulching...

Gator blades are not meant to bag or be any type of high or far discharging of the clippings. They are meant to mulch only. Mulching...

The oil is API SL rated. This puts it at between 900 and 1200 ppm.

Dude, flush the tank out with gasoline only. Stop it with all the snake oils. More and more alcohols (Heet) will only falter the proper...

Gator blades are more of a constant mulch cut blade so the chute discharge would be lower than standard blades.

Is the compression release working? Did you use an automotive compression tester like for a 350 Chevy for example? OR one for small...

Make a youtube video of it running or cranking. Link it here so we can watch it and help you.