Latest activity

@ScrappyDoo You got some bad info. 64psi is about 1/2 of normal. 120ish is ideal, 100 or higher would be expected to run properly.

Belt palace may have a belt 1 inch shorter that would fix your scene

Perhaps take a long straight edge to see if the pulleys align. If unable to shim or align, possibly use a narrower belt. Belt palace is...

What is even more exciting is do that with a flooded chainsaw between your legs when it ignites. (spark plug out) Looks like a fire...

Thanks. If it is excessive, which I'll have to look into how to check that, I hope it is a blocked breather hose. It runs too well...

“ Leading us to what could be the main culprit, your fuel can spout. Is your can spout an old open type or do you have a new sealed one...

there are three pages to re-read so I will just comment. The way to use the dye is to clean the area off completely with some brake...

I don't know if you're replying to OP or me but I will check coils. I checked with an open gap spark tester but not under load. I will...

Ok Tanks. On the next weekend i make the head up and i Look to the valve. Maybe IT is durty and i clean the valve.

The only difference is the shape. One is short and fat, the other is tall and skinny. Either will work on your 852cc block. It depends...

That sounds like popping back into the intake which likely means the intake valve adjustment is too tight or it has a problem with the...

The exup ist 0.20mm and the Inlett ist 0.15mm.

Tanks I make a New Video. You can hear it bester

It's probably the carburetor that Amazon sells for $9.99 with free delivery tomorrow so not worth the trouble of trying to clean it.

Those carburetors are very easy to clean, if you know how to do it. Must remove the white cartridge with jets and take it apart and...