Latest activity

Use Honda Bond sealant and you will never have another oil leak. Of course, it will be hell to ever get apart later if needed.

It has been a few years, but seem to think it was Hondabond 4 or do they make a 3. Anyway. It seemed to work fine on sumps, and some...

Never seen Honda Bond turn black before. I'm talking about the white version Honda has used on their engines for many years. The next...

The last tube of Hondabond that I used turned black, crispy, and would start leaking within 15 minutes of starting the engine. Seems...

Use Honda Bond sealant and you will never have another oil leak. Of course, it will be hell to ever get apart later if needed.

Thanks again.

I'm referring to only one cylinder head at a time. There are two valves in each head. Only adjust the valve lash on one head at a time...

Thanks. Owner wants to hold off, so I'm not doing it tomorrow. I appreciate the video, will watch.

So after checking the inlet hose, I suspect that he gasket wasn't sealing well. I could hear a sucking sound occasionally while it was...

He's talking about the same cylinder. Some folks do it with one valve fully open and one valve fully closed.

When you say opposite one, do you mean the other cylinder? I am used to doing TDC. I may do this tomorrow.

mine had noise due to harmonics and that may be what is breaking yours, I split a hunk of pool noodle and ip tied it around the spring...

I would call technical support for the manufacturer. Sometimes there are technical bulletins that say things like, "If part #XYZ is...

I'm not a huge fan of RTV either. Most have vinegar or something similar that is acidic. Would guess on aluminum parts not a good recipe.

I'm not a huge fan of RTV either. Most have vinegar or something similar that is acidic. Would guess on aluminum parts not a good recipe.