Latest activity

soooooo on to my next installment of the process to fix this thing. After failed attempts to get the back wheel off, I started to look...

soooooo on to my next installment of the process to fix this thing. After failed attempts to get the back wheel off, I started to look...

It happens when it's running and yesterday when I tried to move it and it was stuck in forward. I'm sure if I start it up I'll be able...

I haven't had a chance to check the belt yet but if that ends up being the issue I'll most likely have a local shop take a look at it...

Question Does this only happen when the engine is running or does do it all the time running or not?

Hello T., I suggest you remove the deck and then get the frontend high up in the air so you can observe the pedal linkage and shifter...

First thing I would check is the drive belt and tensioner. More often than not I find a worn belt and/or tensioner that won’t pivot...

I bought a used Craftsman T 1200 247203720 and I'm having a hard time getting it to shift from forward to reverse. Once I get it into...

the best solution would be to find a mentor who can help and oversee your work. The exhaust glowing red might indicate a cam timing...

Thanks for the support everyone I really appreciate it, I am decently educated in engines but I don't exactly think i am better then...

As I once told my idiot brother that said questions I asked were stupid. At I least admit I don't know everything and asking questions...

Also, most of today's teens don't set the bar very high. Just saying... ;)

I'm proud of being in that minority 😁. As someone who was self taught, working on engines can be stressful at times and it's a lot when...

Before you touch the engine again you must get yourself a good understanding of all things which make an engine run. To do this I...

Oh yes I forgot about that, I did measure the cylinder and out of round was I think .0008 with a dial bore gauge, taper and ridge were...