Latest activity

You should be at idle when shutting down.

I’m confused, would you please provide us with pictures of the old fuel shutoff and the electric inline shutoff you installed. The only...

My first thought is the ignition modules are not being shutdown when the key is switched off. So they are continuing to produce spark...

Made a puller to pull them out on Briggs and Kohler carbs with brass seats Kohlers new seats are Zinc and alcohol fuel won't damage them.

Doc, I assume you are referring to Tecumseh carbs with the replacement seats. Personally I have found these are about the easiest carbs...

I take shop air and stick it in the fuel line fitting of the carb and blow it out. Tool works great to install it.

Bet you a lot of money the blades are not balanced. New blades are never balanced by the makers. A friend of mine had the same issue...

You can use toothpaste not the jell the white paste type and a Q tip.

You can also put a wooden Q-tip with valve lapping compound on it and chuck it up in a drill at low speed. Then switch to carburetor...

Hello Folks, Carburetor cleaning can be a chore, but sometimes it takes more than just good carburetor cleaning and a round in the...

I have the Gravely HD ZT48 with the mulch kit and have been using it for 6 years now. Like has been said, the cut quality is poor if...

The other day I decided to try and adjust what I thought was the brake behind the right rear wheel. As I was adjusting the nut inward, I...

Good to know... I've pretty much given up on trying to get that wheel off for now. I've been making some progress in figuring out why...

I did buy and try some bead sealer. ($15.99!). I can't imagine I will ever come close to using it all. If anyone local needs some, I...

They were strapped/shipped really tight and I knew they would be difficult. I thought about trying to use a inner tube but as with my...