Latest activity

Hi Ozcub, Yes, you said "ponder", yes, I pondered before I replied. Not an attack on you, just stating what I know from many years...

Correct, switch is open with nobody in the seat. It closes with relatively light pressure on the seat so i'm confident this switch is...

this is a pic i got off the web. it's hard to tell because that idler arm swings around when it's not under tension and so i dont know...

Hey Auto Doc . did not say it was correct , I just said "ponder"

Hi Ozcub, That is an "old wives' tale" that has been around since the early wooden encased battery days. That story has been disproven...

Hello R., From this picture, I think the belt retainer tab is clocked in the wrong position for the larger idler pulley. Loosen the...

Um, yes it will. While cranking, if the battery voltage drops to 10.5VDC or less, battery is toast. Or measured AT the starter while...

Clean the Carburetor

OK I started to take it apart but changed my mind when I found that two bolts held everything together, air cleaner, carb, gaskets (4)...

I use nothing but non Ethanol fuel in mowers plus Yamaha zuma 50. Also the person who services all my mowers, scooter (not a dealer)...

Clean the Carburetor

its probably the buttons under the seat not adjusted for making contact with seat raised try pushing the buttons with seat raised,

Heres one for you to ponder , you cannot charge a battery whilst it sits on a concrete floor , Go figure

front left has two holes drilled for holding the tension rod and the front right shows the tensioner pulley , at a slight angle, out of...

yes, manual blade engage. ...I've learned that the big main pulley should be at an angle, but you are suggesting that littler idler that...