Latest activity

Hello C., Do you have a basic multi meter that can read AC and DC voltages? If not, you need to get one. Throwing parts at a problem...

Hello Scubcadet10, This is where many people blame the Nikki carburetor because they could not just simply open it up and clean it with...

that gasket that seals the plastic assembly needs replaced anytime you remove it. or else it WILL leak like this.

Hello G., That is bordering on commercial grade. How many acres do you plan to mow on a regular basis? The pricing has climbed...

Go to the link Kenbu sent you and scroll down the page, "old cajun" has it all laid out

AutoDoc, It has a 4 pin connector for the seat control module like the one shown in the attachment. It that the magic box you were...

Thanks Star Well, that explains why I couldn't find an ECU anywhere on that tractor. 10 relays in a row above the engine.

Hello P., The only adjustment on the carburetor is the idle stop screw with the Phillis head. The generator governor and tension adjust...

interesting, so it is supposed to be tilted and higher than the others. so the rest should be level in in the same plane with one...

The 3rd pulley from the left is find. It is supposed to be mounted on that angle to guide the belt coming off of the spindle pulley back...

Model no.

https://www.cubcadet.com/en_US/zero-turn-mowers/z2-42/17RIEAEE010.html

Here is the wiring diagram you will need...

My rear axle broke and its a discontinued part. Anybody know any other brands that would work or used one or anything?

Craftsman 917.250811 I’m guessing this is serial 061615D002050 If you come across an electrical diagram I’d like to take a look at it...