Latest activity

The pic shows the tensioner spring is not hooked up to the frame at the correct spot and you are missing the belt guide at the smaller v...

Oh Ok thank. ... so I'm kinda wasting my time then :-(

Aluminum will still oxidize back to a duller finish.

Go to Parts Tree or Jack's Small Engine and use the engine family number in the top left corner of the label. Look at the base of the...

I just found an old online manual and it looks like they call it a valve helmet #9 and according to the picture it’s on the exhaust so I...

I have a neighbors harbor freight wood chipper that I am taking a look at. I took of the head and noticed a part on the ground. It...

Apparently, after shop did pressure test they didn't connect fuel lines in the proper order but told me it was not cost affective for...

You mentioned the fuel filter. How old is it? As a general rule if an engine requires choke to run that is an indication of too lean...

This would be to run the whole house for whatever length of time was necessary. Dual fuel is a good option and the electric start is a...

Thanks for reporting on your progress and success!

Sorted the problem, the inlet valve did not have enough clearance on the cam - so it was open all the time. no vacuum created and so no...

Hello D., Give them a chance to make it right before you throw them to the curb. Parts frustrations are not easy but give them a chance...

Sorted the problem, the inlet valve did not have enough clearance on the cam - so it was open all the time. no vacuum created and so no...

Hello P., I help folks in my area with generator issues and sizing quite often. It amazes me how many people do not understand...

Hi CG, That looks like a match in pictures and on Parts Tree. Winner!