Latest activity
-
AAuto Doc's replied to the thread ferris z2 blades stuck on.If you unplug it and check resistance and get no reading the windings are open in the PTO clutch. You will need a new clutch assembly.
-
Should be under warranty let the dealer deal with it. -
lukewuko replied to the thread ferris z2 blades stuck on.Yes -
AAuto Doc's replied to the thread ferris z2 blades stuck on.Does this model have a 2 wire pto clutch like most do?
-
ZZzz reacted to Forest#2's post in the thread Briggs & Stratton 8250 storm responder carb bowl held on with Phillips head screws??? with
Like.
Have you ever seen a Arthur Head screwdriver? (very rare, possibly only 4 made from the A head of a typewriter key) The A on the... -
Craftsman Garage reacted to slomo's post in the thread This is the stuff that makes small shops look bad with Like.
Those AC's are not even close. Good find ILENGINE.
-
lukewuko replied to the thread ferris z2 blades stuck on.I dont believe the gaps adjustable I tried the wires going to the clutch and theres nothing there so I guess im going to trace wires or...
-
-
AAuto Doc's replied to the thread ferris z2 blades stuck on.Hello L., If you have a multimeter, Ohm the 2-pins going to the clutch with it disconnected from the chassis harness. If you don't get...
-
lukewuko replied to the thread ferris z2 blades stuck on.So I found out I had a stuck bearing I fixed that now I cant get the blades to engage I checked the fuses what should I look for now?
-
ZZzz reacted to Scrubcadet10's post in the thread Briggs & Stratton 8250 storm responder carb bowl held on with Phillips head screws??? with Like.
Im usually able to grip the heads with Irwin vice grips and get them out that way
-
ZZzz reacted to Rivets's post in the thread Briggs & Stratton 8250 storm responder carb bowl held on with Phillips head screws??? with Like.
For those who don’t know, there are 2 types of 4 sided screwdrivers. One is called a Reed and there other is called a Phillips...
-
ZZzz reacted to ILENGINE's post in the thread Briggs & Stratton 8250 storm responder carb bowl held on with Phillips head screws??? with Like.
I use one of these...
-
ZZzz reacted to Forest#2's post in the thread Briggs & Stratton 8250 storm responder carb bowl held on with Phillips head screws??? with Like.
Post up a picture of the bottom of the carb bowl showing the screws? I suspect you have the JIS (Japan Inbred Screw) type. I use the...
-
ZZzz reacted to StarTech's post in the thread Briggs & Stratton 8250 storm responder carb bowl held on with Phillips head screws??? with Like.
One way to get these screws is take a long solid bit of the appropriate size. Mount the carb in a vise with protection for the carb...
-
RRivets replied to the thread Poulan 2375 runs only with full choke.If it has not run for awhile, I would be checking the crankcase seals. They may no longer be sealing the crankcase, allowing air to...
