Latest activity

You're not likely to get an answer. He hasn't been on this forum since 2023.

I would hope that people are changing their oil sooner than that.

I just pulled a carb off a Dixie Chopper XFG2700 year 2003 with a 27 HP Generac. Took the bowl off the carb and looked at the jets the...

Gary has left the chat.

Yes

AD, You mean a PTO seized/stuck in the on position.

Three things that have bailed me out when I run into this problem with Phillips screws. 1. Make sure you have the right size driver...

Look at this first. Soft copper wires with probably a crimp connection joint = a recipe for disaster. All the engine vibes will kill a...

Powerbuilt 1/2" Drive Impact Driver Kit

Generator unit is about 14 years old Briggs & Stratton Storm responder 8250. Always run clean gas through the unit and use stabilizer...

Hello C., Are you using the proper fuel/oil mix? I don't recommend store bought Tru-Fuel, that stuff has created more headaches than...

Thank you!

Can you unplug the PTO wires, and the blades still stay engaged? If so, it likely has a seized-up/ failed PTO bearing.

Thanks for looking into this Ibrahim.

So I checked our web server logs around that time and didn’t find any server errors or slowdowns at that moment. The traffic there was...