Latest activity

Star Tech. Thank You I Have not been into the carb for a real long time, but I will keep that in mind. See my response to Auto Doc...

Thank you for responding Auto Doc Plug = I had a E3.12 that was about .030 and replaced it with a new auto lite gaped at .020 Cylinder =...

There is no needle on this model. Has a screw with a hole (jet) at end of screw and a couple holes on side. I will clean again, I've...

Thank you

Hello T, Back when I started in the late 70's we actually learned how to perform reliable overhauls and parts were abundant for...

Very few shops rebuild small engines anymore, including me. It takes too long, too much liability, and not enough money for all the work.

What equipment is listed at, and what it actually sells for, are obviously two separate things. I get people nowadays that make lowball...

You must have the same transaxle for replacement as original. IE: T40 Tuff Torq. Otherwise you have to do modifications and it can get...

Carb cleaner and a cordless drill with wire wheel and safety glasses. Then use green Scotchbrite to finish it.

He wants to permanently repair the loose plastic fuel inlet fitting. Not permanently attach a fuel line. Please post the product that...

Possible fuel leak?

Very few shops rebuild small engines anymore, including me. It takes too long, too much liability, and not enough money for all the work.

Looks like I'll be buying from the US... Just dropped into the local stealership and they wanted US$164 for just the 537437906 handle!!!

Looking for a full PDF of the Bolens MC2800 (chipper/shredder) owner’s/service manual. Model may be listed as MC-2800 or MC2800...