Latest activity

Belt tensioning on electric PTO mowers are usually spring loaded idler wheels with no adjustment. Manual PTO models the belts are loose...

So I finally got the mulching blades on and wow do they chop the leaves up to a fine dust.

I cleaned all jets/ports and reinstalled the carb but still no start. I discovered that when I pulled the cord, fuel dribbles out of...

I have seen this exact same coating when a customer had diesel mixed in a fuel can. I ended up using Chemtool B-12 carburetor spray to...

Where the hose connects is a 90deg elbow. The elbow turns freely. It also leaks fuel. If I add epoxy, will it solve my problem or break...

Ok I just got it out in less than 1 minute thanks to your help StarTech. I really appreciate it!

I see, the pin is part of that flat metal piece. That helps a bunch. Thanks so much for taking time to explain that to me!!! BTW this...

Hello All: I have a Honda HRC216K3 Engine cylinder head that has developed unleaded fuel residue both on the intake valve and the...

Check your engine manual for that information. I know B&S list both petroleum oil and Synthetic oil for use but I don't know about Kohler.

It is a Chinese carburetor. Your best bet is to try Parts Tree using the model plate information off the generator. Here is a parts...

McClane is just the brand of the edger. The engine is a Briggs and Stratton. Is the carburetor bolted tightly to the engine? I think...

If I was you and had removed the entire drain valve, I would replace it with a drain hose and not that twist and pull valve that is...

Hi, I have quick change oil valve on my Troy bilt Pony 2020. I changed the oil yesterday. I drained it after mowing on a hot mower. the...

Makes sense that the device is a fuel pump. Thanks for pointing that out. First time I have encountered such a device (I usually work...

Hello Tim, I ILENGINE has already answered your question. If the generator has sat for a long time, the float needle is likely stuck...