Latest activity

I recommend conventional 10W-30 for at least the first 50 hours of use to ensure complete break-in, then switch over to synthetic.

Does anyone know how to remove the strut from the deck? There is a nut and bolt but it's connected to a plate which seems to be welded...

It doesn't really matter whether you use synthetic or conventional oils. Lots of commercial guys change their oil at 50 hours...

I run 20w50 syn in my zero turn, no issues at all.

I pulled an old well worn JD160 from a town dump and went to work getting it into running order. After a long day of effort and spending...

Grab the spark plug lead and try to start it....

I have never received an obvious returned part from either Amazon or EBay, ever. I also rarely return parts. The quality of parts from...

Hello JohnnyMtn, You could have gotten a bad coil. "New" does not mean good, especially online. Some coils have been returned many...

I have a B&S 125cc push mower. It started stalling once it got hot and then several weeks later would not start at all. I have done...

The pic shows it in a steel pan I emptied the tank into. Is this relevant? Why are you curious? I have never heard of the tank liner...

Around 50 degrees.

What temp in F are you calling cold?

Agree with the compression relief. I had same issue, thought starter, battery etc. After replacing starter, took engine out and found...

With the valve gaps set correctly, and the spark plug removed for easier engine turning, turn the engine by hand while watching the...

Depending on vintage, you may have a safety lockout that kills the ignition whenever it wants. Older models had a black plastic...