Latest activity

I totally disagree about the Cub Cadet “zero turn” steering wheel mowers and them being able to hold a hill well. Logic tells me if...

Customer has 90 days from date of invoice and notification that their equipment is ready to pick up from my shop. I have a sign clearly...

Hi hlw49, I have also had several that destroyed the entire works so there was really no other choice but to replace it all if the...

Hi Turf Man, A JD 335 zero turn has never been good on inclines unless going straight up and down, even then they get a little...

Was not that lucky. Ground up the magnets and wiped out the stator even burnt up the regulator terminals. Yes, I have seen that done...

Hi tooler, These had upper input shaft bushings in the trans housing that would seldom wear. You would need the number off the...

Hi hlw49, Information that may help you in the future to save the customer and you some money: Did the magnets just come loose and...

Best zero turn I have seen for a hill is one with a steering wheel like the Cub Cadets. I have always said they made the zero turn...

Anyway, she called me to let me know she had mowed her whole yard, she has a large yard. She was really tickled to get it mowed.

I have a steep hill that drops off into a lake. Not 45 degree, but steep. I have a JD Z335 and it slides down the hill. I’m looking for...

My new to me tractor suddenly seized up so the belt starts to burn. I removed the deck and found that the pulley on the transmission...

Trick is a non hardening sealant. This stuff is great if YOU are the guy removing the cover next time. For valve covers and oil pans...

LT42 bagger chute backs away and disconnects from bagger during operation - can’t get it to stay. Any suggestions?

Seeing that you don’t supply us with a model number, I suspect you have a model D engine. I agree,probably a fuel issue. Here is a...

Trick is a non hardening sealant. This stuff is great if YOU are the guy removing the cover next time. For valve covers and oil pans...