Latest activity

Here is a starting point But from your description I would say the ignition switch acting up in the past would be a starting point...

Hello B, I have replaced quite a few main fuse holders for the problem you described. The next suspect is the ignition switch but be...

FYI, the crankshaft length is the distance from the underside of the mounting flange of the engine, not just the part exposed beyond the...

Brand New=under warranty

ohhh my, too funny..... some people need to have their sensitivity meters calibrated . . . . . . :ROFLMAO:

neighbor has a bent crank shaft. Are all Honda 160 engines on walk behind mowers interchangeable? Same shaft length and diameter?

I have a Toro Titan and I am guessing the control arm connection to each of your hydrostatic transmissions is the same on yours. The...

One would think the filter would catch all the break-in metal in the filter. Take the dumped oil out in the sun. You will see a pan full...

FYI, the crankshaft length is the distance from the underside of the mounting flange of the engine, not just the part exposed beyond the...

You're a LEGEND. Saved my 25 year-old beloved SRM2100. Was having similar issues to what your described. Ordered a $10 Chinesium...

the Interface between the mower and unit has never been loose or leaked. Mine made a mess when I pulled to hard when . The plastic...

There is no hard stop to prevent pulling the thing apart again. And you will be tightening the threaded portion everytime you service...

What stops it from pulling too far forward when pulling it

So true so true......

All true. The manuals will tell you to turn the mower on its side to drain the oil through the fill tube. Often, if there is a drain...