Latest activity

Nothing but Romper Room here fella. All you are doing is adding to the landfill every 2-4 years with your hazardous batteries. Most...

Seat by hand and 1/4 turn for new, 1/8 turn for used.

With sealing ring per NGK. Taper seat has a different spec. Now of course this for new plugs, older used plugs it is as Bert suggests...

Fella, doesn't matter if you run Diesel or Coleman fuel. You will still get grass, bugs, dirt dobbers, leaves, grit, water and so on in...

And even be a slightly bent double stack engine pulley but make sure the spindle brakes are good and working

Hello NW1, The first suspect is wrong belt or incorrect routing. If they are trying to turn slow, but not up to full speed, the deck...

Hello M, If you are making a habit of running your mower dry for Winter storage, don't. All that does is dry out the needle and seat...

Hello B, I have replaced quite a few main fuse holders for the problem you described. The next suspect is the ignition switch but be...

Hi TimS, Make a new posting and provide the product label information for the rider. Does anyone have the owner's manual for the rider...

Thanks for the update and the fix sano888.

I'm having the exact same issue with Mom's Bronco. Just picked it up from Moms house so I could figure it out. Someone has put a drive...

Tried to loosen the bendix with WD-40 and then carb cleaner as I saw in some videos. Did not work. Just replaced the starter and am...

Here is a starting point But from your description I would say the ignition switch acting up in the past would be a starting point...

G'day gang, Yes I now fully agree my last posted question re: 'how to hotwire' my Toro ride-on was foolish & not...

I went with a 80V battery system with assorted yard equipment that works great but I use the mower to blow the leaves into the woods...