Latest activity

I suspect that the linkages are not hooked up correctly. This manual should help you double check your assemblies...

Without the engine numbers I’m assuming you have a Briggs engine with the primer bulb mounted in the air filter base. Most times the...

My throttle does no engine speed change from idle to full throttle. The governor is set okay, the throttle cable moves the throttle...

Hi, I have the above captioned mower that has a priming bulb. After repeated priming the plug does not even look wet....however if I put...

Hi, I have an older trimmer that has a priming bulb. After lots of primes it will not start, until I put a few drops of gas into the...

I did remove the fuel line and dumped some in a glass jar and couldn’t tell if it had water as the jar was beveled on the bottom 🙄 and...

Intake .003 - .005 Exhaust .005 - .007 Always set closer to the tighter clearance on OHV engines.

Simple test before throwing time and money at this engine. Before opening the engine hook a VOLT meer across the battery and watch the...

That is the business answer. Not everything on here is about business. Sometimes people want to do something to learn or just for the...

Ethanol is blamed for many fuel related issues in small engines. In reality, poor storage of fuel and putting up equipment long term...

That is the business answer. Not everything on here is about business. Sometimes people want to do something to learn or just for the...

Talk about confusing. That deck uses the 1732354 or 1732354SM spindle pulley which appears to be the deep groove. The parts diagram...

Just got 4 more for the inventory a couple weeks ago for the spring stockup order, and there was no backorder or delay in shipping...

Or in the case of the old Kohler K-series it was recommended to replace the head bolts. The understanding was the bolts were designed...

With the valve gaps set correctly, and the spark plug removed for easier engine turning, turn the engine by hand while watching the...