Latest activity

I have never received an obvious returned part from either Amazon or EBay, ever. I also rarely return parts. The quality of parts from...

Hello JohnnyMtn, You could have gotten a bad coil. "New" does not mean good, especially online. Some coils have been returned many...

Did you mount the coil correctly?

I have a B&S 125cc push mower. It started stalling once it got hot and then several weeks later would not start at all. I have done...

model type and code no.

Check the mounting brackets to see if they are cracked and the front mounting bolts are not broken.

That is what happens when they make a product that accommodates too many options. Too many compromises. It does not work well at...

Beam type wrenches work well for head bolts but when trying to torque a bolt in a tight place you can't get a view of the reading. To...

I have a plastic gas tank on a Briggs Quantum engine and the ethanol caused large gel like clumps to form in the tank. The internal...

Beam type wrenches work well for head bolts but when trying to torque a bolt in a tight place you can't get a view of the reading. To...

I recall AlumaTap when I worked in machine shops. If you used Tap Free on Aluminum it would turn it black. Back in the day. Now they...

I do check mine with a digital torque adapter. That how found out how lousy HFT torque wrenches were. One was nearly double the torque...

to add to the discussion - if one goes to an engineering book on torque values, it is not just the fastener but what it fastens too. I...

There is no perceivable play in the piston. If I have it apart I usually like to replace the rings on an older engine. If not too...

I have a Snapper SR140 33” with a Briggs & Stratton 12.5 hp I/C Quiet Rider Model 286707 0136 0. I recently purchased it used to cut...