Latest activity

Thank you for the reply. But honestly, not sure that makes sense. Looking here...

It looking that way.

IMHO you have accumulated wear issues. Might be time to go compare costs of replacing things with just fixes to get by. Might be you...

"The issue is going to be cost effectiveness. It gets used once a year when the leaves drop. Anything else is easily handled with a hand...

the blades need to be an airfoil. They move air up and the deck is shaped to flow the air out the chute. New air moves in from...

IMHO you have accumulated wear issues. Might be time to go compare costs of replacing things with just fixes to get by. Might be you...

as suggested replace the gasket, take the old one with you if you buy it locally. Also, use a machinists straight edge to check the head...

So I got the old valve keeper installed and had trouble getting it to run. I set the valve lash 3-4 times at .005 both valves. I must...

I was not clear in my word description of what I was trying to do, but with those two hand drawings I hope it makes it more clear the...

Any luck with this issue, OP? I am having the exact same problem following the replacement of both drive belts. Both belts are OEM. The...

Thanks for that. That is precisely what this thing is doing. I thought assembling the stator and rotor without the wiring sockets...

The issue may be with the generator section and not the engine.

You might ought to stop skimming threads and read the whole thread as it is posted in post #8 back on September 20th. Skimming threads...

Sounds like the throttle cable jacket is not properly locked into the handle retainers.

I have a Honda EU22i (same as 2200i I'm told) Generator, which is very hard to pull over. You can not pull it over quickly enough for it...