Latest activity
-
VirginiaIron reacted to BudLight's post in the thread Increasing rear tire size on Toro 42 inch Timecutter with
Like.
If I had the opportunity, I would go with 1.5” spacers. They would provide adequate clearance on my mower and I assume less pressure on... -
Does anybody have the wiring schematic for the gator XUV 620i. Had a customer bring me one that will not start after fuel pump... -
VirginiaIron reacted to BudLight's post in the thread Increasing rear tire size on Toro 42 inch Timecutter with Like.
Sorry for the reversal on the photos. You’re correct. I posted the revised photos first. Regarding the warranty…. I started this...
-
SSamB replied to the thread Okay, this is going to be weird. Rear-engine goes too fast..Over this weekend, I replaced the worn shift yoke on my 1984 XT 33 Snapper rider. Not a real easy task given the amount of space and all...
-
BJust prove everybody has a different knowledge database. These gauges are not the greatest for mower pulleys but they work well enough...
-
Post all engine and mower model and serial numbers. We can then tell you how to adjust the governor.
-
VirginiaIron replied to the thread NASTY surprise from Toro on filler plug.My unit has an Allen socket. Use a long Allen socket to tighten and break it loose. Use a long wobbly Allen extension to remove and...
-
VirginiaIron replied to the thread Rear drive wheel-Toro model 20374- keeps coming loose?.Use blue threadlock. Red threadlock might require heating the bolt in order to loosen it.
-
Vvolvoram replied to the thread Rio not working with new engine.
-
Vvolvoram replied to the thread Rio not working with new engine.Yes reverse works fine, replaced drive belt when I did engine replacement
-
VirginiaIron reacted to trooper1954's post in the thread Rear drive wheel-Toro model 20374- keeps coming loose? with Like.
I guess no one has had this issue.....almost 200 reads and no comments. I'm going to try threadlocker on the issue, as vibration was...
-
VirginiaIron reacted to OldNoob's post in the thread Snagged a TORO 210-5 for $140... but it doesn't have headlights. Looking for sugestions for headlight mods. with Like.
Greetings all I picked up this TORO 210-5 mower, it runs great. Currently updating the drag links and tires and will be sharpening the...
-
My wheels have pressed in wheel bearings. Can just the bearings be replaced or do the wheels need replacing? If the bearings can be... -
ILENGINE replied to the thread Husqv hydrostatic transmission.Will need more clarification since the 4622 brings up Zero turns not lawn tractor style mowers. And if this is a Z turn than it would...
-
Too risky. Not worth it to me because it only takes me about 30 minutes or so with my oil syringe once the oil is hot. Yeah I can't...