Latest activity

But the appear to be available in Canada and Europe so my Canadian buddy is getting it for me. Husqvarna and Poulan just doing it to...

Thank you for your response I believe my only choice is to buy a belt shorter than the one it calls for

An oiled plug, rusted in place...... Let that percolate a bit. Meaning they stripped slash cross threaded it.

Now you've gone and done it..... some years ago, I was passing by a Monroe Muffler shop it dawned on me my oil was overdue on the...

did anyone look at the Amazon link I posted? These things are incredible.

All way too complicated - I use a piece of malleable aluminium flashing (replaced lead). Can be purchased from the hardware in a small...

small 22 caliber directly through; but do it in the grass, not a concrete floor ..... 😱

Hi ljb, Pull the plug wires and crank the engine a few times while the drain plug is out, then let it sit and drain a little longer...

Sorry no the engine sits horizontal on the ground when not used

HUSQVARNA 129 325 329 TRIMMERS 545008096 supersedes to 599568901 Seems every one of my sources is out of stock. Now can you give me...

I'm all eyes. Please elaborate. 🍿🍿

Don't know how many valve covers I've tried to remove. Globs of RTV all over the engine. End up bending and replacing the valve cover...

I agree with slomo, At the very most I will only use ultra gray very thinly on a good gasket to reseal a valve cover, but not just...

Please think, of the next guy, that has to remove that cover. Use the OEM paper/rubber gasket if at all possible. Or a sealant that...

Pulley groove wear gauges