Latest activity

  • R
    R Williams reacted to Auto Doc's's post in the thread Welch plugs with Like Like.
    StarTech, They are going to have to peen lightly with a center punch them in the center to lock them in.
  • R
    R Williams reacted to StarTech's post in the thread Welch plugs with Like Like.
    There is only two different welch plugs use on the FX691V carbs. 92066-0780 Bypass holes, relative cheap at around $1 ea 92066-7009 Air...
  • R
    R Williams reacted to Auto Doc's's post in the thread Welch plugs with Like Like.
    Hello R Williams, For the welch plug, you can fashion one out of a tiny piece of aluminum that will fit the hole, then put little bit...
  • R
    R Williams reacted to ILENGINE's post in the thread Welch plugs with Like Like.
    I have never seen a 9/16 spark plug thread. All spark plugs have been metric thread since 1934. I would suspect that you have the...
  • R
    R Williams reacted to StarTech's post in the thread Welch plugs with Like Like.
    Beside most of the FX691V engines use a NGK-BPR4ES which is a 14mm thread as IL said. Also switching to 20W50 Dino or 15W50 Synthetic...
  • R
    R Williams replied to the thread Welch plugs.
    Turns out I was completely wrong on my initial assessment. Upon removing the valve covers the issue is much larger than the welch plugs...
  • S
    slomo replied to the thread GX85 Stiff Steering.
    It's 2025 now. Can we please get color photos of parts diagrams? Too much to beg for? This Crayola stuff is nuts.
    • 1758222869602.png
  • S
    slomo replied to the thread Front tire worn!.
    Does it look like a new front tire? Does the new tire come with flat surfaces? Is the mega mower parked for long periods of time causing...
  • S
    It lets us all post pics. If yours are too large, resize for free in Windoze 11 Photos app thingy.
    • 1758222543910.png
  • A
    Thanks for the reply, sounds like some creative engineering for sure. I did a lot of crazy modification like that when I was younger and...
  • D
    If this forum would let me post pictures I'd show my frankenstein engine to you. I click the paper clip and it shows me pictures that...
  • S
    slomo reacted to dana a's post in the thread Briggs blowing oil out crankcase vent with Like Like.
    Yesterday I topped off the oil and started it up and it ran fine and didn't puke any oil at all. The vent is a large hose about 1/2 inch...
  • S
    slomo replied to the thread Now the mower will not crank!.
    I use this. Non hardening sealant designed for oil, gas, grease, aviation and automotive. Made for valve cover gaskets and oil pans...
    • 1758215804963.png
  • P
    Paxilcr1! posted the thread Front tire worn! in Exmark.
    How to tell if zero turn front tire that has a flat surface is worn?
  • M
    If it is a 2004 model, you are under the illusion that you are getting genuine OEM. (You are only paying dealer prices for a "best...
Top