Latest activity
-
GBriggs & Stratton Flywheel magnets: Are there one or tree magnets and which POLE orientation? See appended 2 files
-
-
KKenbu replied to the thread GX85 Stiff Steering.I’d look at parts 9-11 here...
-
Tiger Small Engine replied to the thread Now the mower will not crank!.Use a heat gun to soften up the RTV. Use a drill with a wire brush to remove the RTV. -
MManicurist reacted to Auto Doc's's post in the thread Replaced Ignition Switch now blades engage but won't disengage with
Like.
What prompted you to replace the switch to begin with? Aftermarket switches are a best guess. Did you get it from an actual Hustler... -
MManicurist reacted to StarTech's post in the thread Replaced Ignition Switch now blades engage but won't disengage with Like.
it is more likely that the PTO clutch is sticking or the PTO switch is defective. The PTO switch would turn off the power to the clutch...
-
MManicurist replied to the thread Replaced Ignition Switch now blades engage but won't disengage.It is a 2004 model. The key hole was just worn out. Hustler dealer. I have only used OEM on this machine +/- blades. Past 4 years...
-
Hhlw49 reacted to txmowman's post in the thread FR730V-CS15 needs to be replaced; will the S00 variant work? with Like.
Yes, that is the correct replacement. Currently FR730VJS00S. It will be money well spent to go with an FX model for a few hundred more...
-
JJimP2014 replied to the thread Rattling noise when rotating flywheel.I was able to install a new head gasket on this 19.5 horsepower Briggs& Stratton OHV engine I ran it a couple times and someone...
-
AAuto Doc's replied to the thread Replaced Ignition Switch now blades engage but won't disengage.What prompted you to replace the switch to begin with? Aftermarket switches are a best guess. Did you get it from an actual Hustler...
-
SSHMdrid replied to the thread drive pulley.Engine pulley Crank Shaft Sleeve Adapter Extended 1 to 1 1/ 8 inch 1/4" Key Gas
-
SSHMdrid replied to the thread drive pulley.I found this. must have read mdl wrong. Briggs & Stratton 44S977-0033-G1 Vertical Professional Series Engine, 25.0 Gross HP, 724cc...
-
SSHMdrid replied to the thread drive pulley.I will have to machine too the shaft and weld the pulleys. Thanks for the great timely and professional response. Jim
-
jz8fenton replied to the thread FR730V-CS15 needs to be replaced; will the S00 variant work?.@txmowman thank you for the offer! E/NO: FR730VC24580 -
Ttxmowman replied to the thread FR730V-CS15 needs to be replaced; will the S00 variant work?.Usually is. Service is what keeps a lot of shops in business. People just don’t give their mowers any consideration for maintenance...
-
Ttxmowman reacted to jz8fenton's post in the thread FR730V-CS15 needs to be replaced; will the S00 variant work? with Like.
Good to know. The person that I bought the mower from didn't do any maintenance on the unit. He was the 2nd owner and claims he only...
