Latest activity

Taryl debunked the alcohol removes water from gas. So did Chickanic if I recall correctly. Heet is a wallet draining item that does not...

in for a penny in for a pound

be aware that the valve guide is not concentric. Each one is unique, and when the valve seats are ground, that guide angle is used as a...

Seat switch or one of the handle lever safety switches has the bracket tab bent back out of place. Mine has done that with the right...

Seat Switch

ok now. I've repaired many of these heads in the past. Remove head, the guide has about 3/16" at top of head under spring. You can buy a...

But the one thing that I really should mention because to figure something out you have to know all the background or the problem what...

Thank you for the reply dark here now but tomorrow morning I can get going on that flywheel is torqued down to I think 90 90 foot pounds...

I have an older Cub Cadet Z-Force zero turn mower, model # 17AF3AGV010. I just put in a new starter and it started right up, problem is...

It sounds like the pilot (idle) jet is partially blocked. The dealer needs to remove and clean the carburettor. It's a very common...

The intake valve will lose clearance and the valve will open slightly. So it doesn't matter where your main focus is on. If you do focus...

You are simply wrong. The planet is not continuing to evolve as it always has. It is warming far faster than it ever has, and the...

Your 13 year old self needs to learn something. To be "woke" is to be aware. There is no such thing as liberal wokeness. That's a phrase...

most likely you have a fuel or carburation problem. Check the oil too to be sure it isn't filled with gasoline that has been leaking...

1st post. Welcome. Try model, serial number etc., and why you feel a need to adjust the belts. For example - if the old ones wore out...