Latest activity

Thank you, Anybody else out the that is familiar with the GCV170 engine?

Take it back immediately.

Just now, just for Schlitz and giggles, I got the jack out of the car, jacked up the front of the Snapper, and lowered it onto the...

I too don't use the red 150 mics. Not enough filtering as mentioned above. Nothing but a window screen inside it. The white 75 mics are...

I don't use the red pancake filters. Not fine enough filtering to prevent debris from not sticking the float valve open. I start with...

Hi, I have a Honda HRN216VKAD, with the GCV170 engine bought new in the box from Home Depot on line this year. The engine model is GJAUA...

Duh, tell us something we all, should know LOL. An old real Snapper will do the same. Got a couple from the 1980's that still cut like a...

I did, didn't know if you had any regrets on the purchase, I was able to get a bushing installed on my original, now it works very well.

We all did LOL.

Yes. Read this entire thread about how I made it work.

Trash in the fuel tank. Or failed interior fuel lines. Or clogged fuel filter. Dirty carb. Make sure you have a solid fuel flow AT the...

The thread with the fuse issue was answered in 2019 and the wiring diagram for that issue was post 18. And the thread was brought back...

Item number 730D https://www.partstree.com/models/9p602-0023-f1-briggs-stratton-vertical-engine/blower-housing-rewind-starter-2/ This...

The noise it was rattling that had to do with a belt guide that has been fixed. So I took apart the cylinder head portion of the...

Must have found the problem!!! Doug Lee *