Latest activity

I know this is a long shot but I am looking for a replacement part for my TB525ES weedeater. I need the lower shaft, specifically the...

Have you had the chance to try the blades that I posted above?

I have a 2011 Craftsman PYT9000 Model# 247.288881 1. The fuse located near the solenoid blew 2 times when I stopped the mower to...

I don’t have a scope.It did sound like some air movement around the valves also But mostly out of the dipstick. The plugs got slightly...

if the head has not been off, do a visual inspection with a bore scope on the piston. You may find that the pushrod was bent when the...

Well that ship sailed in 2021. But thanks for the tip!!

They worked with me for quite a while on adjustments (belt tension, deck leveling) and got me the adjustable casters. It improved things...

What gave me the impression you thought it was a piece of junk??? 1. My cheap neighbor 2. Bought at a pawn shop for $20 3. Condition...

Only 9400 in USSF. You might see 15k tops.

I know but when it is my best commercial customer I do extra to please them and I also get a lot referrals from him. Which more than...

Appreciate the input.

Yes you can always go heavier gauge. Mowers tend to be made on the very edge of acceptable wiring to make them function when new, but...

Husqvarna limits their dealers to 3 per year shipped directly from them. And MTD at one time supplied the adjustment tools to their...

example of warped head

I would suspect head warpage and compression pressure blowing past the head gaskets into the valve pushrod area. (That goes straight...